10 Minutes to Replace a Broken Samsung Galaxy S7 Edge Screen

Samsung Galaxy S7 Edge is arguably an animal among the flagship smartphones. The glass-bent Corning Gorilla Screen makes for a shiny display that is more difficult than it looks. However, it is not completely immune to damage. In the off-chance that you break your screen, you can follow the steps listed here to fix it quickly.

Special tools listed can be purchased online, easy or even rented for 1 hour or January 2 local mobile repair shop. You may need a visual guide that helps you identify the pieces if you are not familiar with the layout. The steps to replace the defective screen of your S7 galaxy are mentioned here.

• Disconnect the appliance and remove the SIM card.

• Heat the back of the appliance with a pistol or a hairdryer until it becomes too hot to touch.

• Place a vacuum cleaner on the back of the unit.

• Insert the back of the unit to remove the thin metal spudger.

• Remove the rear cover by sliding the spudger along the joints. Insert a business card or memory card to prevent the back cover from being sealed again. Do not use a credit card as they are very thick. Remove the rear cover slowly after the entire edge has been detached.

• Use the Phillip screwdriver to undo the 12 Phillip screws that fasten the rear casing.

• Then use a plastic separation tool to separate the upper plastic bracket. Remove the wireless charging station.

• Disconnect the power cord, power cord, exposure, and power cord.

• Use tweezers to separate the loudspeaker module.

• Unplug all aerial cables and cables from the fingerprint scanner.

• Disconnect the headphone jack, the front chamber connector and the proximity and the light sensor plug.

• Now you can lift the motherboard and disconnect the door for charging.

• Remove the rear chamber.

• If you have reached the battery, you may need to warm it up a little to lift it with a spudger.

• Loosen the three screws that secure the headphone jack and remove the plug and the small plate.

• Use the thermal nozzle and apply some heat to the upper glass panel.

• Carefully press the amount of the screen to create a gap between the screen and the front set. You can use the Spudger, but do not insert too deep.

• Increase the gap with a plastic tool or business card. You may need to use tweezers to pull the black glue.

• After removing the adhesive, gently lift the screen from one side.

• Replace the screen and test the new screen before reinstalling the other components.

• Now you have to go through all the steps again to reinstall all other components. Use some heat-activated glue to insert the outer assembly together. Special glue is also available.

If you have experience with manipulating electronic devices, the entire process takes less than 10 minutes. But even a beginner can complete these steps if you follow the instructions carefully. It may be helpful to refer to pictures or even videos to get an idea of how you can proceed. Now you play your degree of experience, remember to clean and dry your hands to clean dirt and dirt. Also make sure that the working surface is stable and is dust-free. visit more Hands On Galaxy S7 Edge Camera Review